Elite X600 LED Face Mask
Elite X600 LED Face Mask Nooance
With 600 red and infrared LEDs, this mask delivers a level of density never before achieved in an at-home LED mask. Every millimetre of the face is evenly covered, with no shadow areas, so that the skin is totally immersed in light. The result: continuous, powerful, and perfectly distributed cellular stimulation.
With 600 red and infrared LEDs, this mask delivers a level of density never before achieved in an at-home LED mask. Every millimetre of the face is evenly covered, with no shadow areas, so that the skin is totally immersed in light. The result: continuous, powerful, and perfectly distributed cellular stimulation.
Free standard delivery on orders over £30
Personalized advice before, during and after your order
At least 3 samples added on request
For any beauty question (or other !) contact our customer service :
Live chat
Start a conversationSkin type
All skin types
Concerns
Sensitivities & Redness, First Signs of Ageing, Wrinkles & Fine Lines, Lifting & Firming, Dark Spots & Hyperpigmentation, Dullness & Uneven Skin Tone, Shine & Pores, Blemishes & Blackheads
Nooance
Elite X600 LED Face Mask
Team insight
A treatment for the entire face – eye contours, lip contour, and jawline included. No area is missed by this mask! What's more, it sits seamlessly against the skin thanks to its lightweight and flexible design.
Application tips
Place the mask on clean skin.
Press and hold the ON/OFF button for 3 seconds to turn on. Then press the Start button to begin a 10-minute session.
Recommended frequency:
One 10-minute session, 3 times per week.
Can also be used while plugged in, with the included 2-metre cable and power adapter.
Care:
It is important to clean your LED mask regularly to prevent the spread of bacteria and maintain good hygiene: once or twice a month (or after each session if you suffer from acne).
To clean your mask, follow these steps:
1. After your session, remove the LED mask from your face and unplug it.
2. Use a soft, slightly damp cloth to wipe the surface of the mask and remove any dirt or residue.
3. If necessary, you may use a gentle disinfectant such as Biseptine to clean the mask. This is recommended when the mask is used by multiple people and/or if bacteria is present (acne, etc.). You may also use an antibacterial wipe.
4. Make sure not to wet the electronic parts, such as the LED lights and wires.
5. Once cleaned, allow the mask to air-dry completely.
6. Store the mask in a clean, dry place to prevent damage or contamination
Results
The Elite X600 LED Face Mask is an LED mask designed for the face and neck. Thanks to its 3D soft medical-grade silicone structure, it perfectly hugs the contours of the face and jawline.
Its 300 red LEDs, boasting a wavelength of 633 nanometres, can penetrate 8 to 10mm deep beneath the skin, stimulating collagen production and improving the skin’s elasticity, firmness, and texture. Thanks to their regenerating and soothing properties, the LEDs help reduce inflammation and redness, increase skin hydration, and minimise acne scars, dark spots, and skin imperfections.
The mask's 300 near-infrared LEDs, with a wavelength of 830 nanometres, penetrate even deeper into the skin to stimulate collagen and elastin production in a different way. They also help reduce skin inflammation, boost hydration, improve texture and radiance, and reduce signs of ageing.
The mask's exceptional irradiance of 50 mW/cm² (that corresponds to the amount of light from the LEDs that reaches the skin) enables effective cellular stimulation, without risk of the skin overheating. In addition, its 90° beam angle allows the light to be emitted perpendicularly to the skin, ensuring precise delivery for direct penetration into the epidermis without deviation, resulting in maximum energy absorption.
The result?
This LED mask – effective on the entire face and neck thanks to its 600 medical-grade LEDs – visibly improves skin quality: it enhances radiance, supports collagen, tones facial contours, refines pores, evens the complexion, and helps preserve youthful skin.
Composition
300 red LEDs (633 nanometres)
Stimulate collagen production, improve elasticity and firmness, reduce redness and the appearance of wrinkles and fine lines, increase hydration, and improve skin texture
300 near-infrared LEDs (830 nanometres)
Help reduce inflammation, increase hydration, and improve skin texture
Exceptional irradiance of 50 mW/cm²
Enables effective cellular stimulation
Application tips
Results
Composition
Place the mask on clean skin.
Press and hold the ON/OFF button for 3 seconds to turn on. Then press the Start button to begin a 10-minute session.
Recommended frequency:
One 10-minute session, 3 times per week.
Can also be used while plugged in, with the included 2-metre cable and power adapter.
Care:
It is important to clean your LED mask regularly to prevent the spread of bacteria and maintain good hygiene: once or twice a month (or after each session if you suffer from acne).
To clean your mask, follow these steps:
1. After your session, remove the LED mask from your face and unplug it.
2. Use a soft, slightly damp cloth to wipe the surface of the mask and remove any dirt or residue.
3. If necessary, you may use a gentle disinfectant such as Biseptine to clean the mask. This is recommended when the mask is used by multiple people and/or if bacteria is present (acne, etc.). You may also use an antibacterial wipe.
4. Make sure not to wet the electronic parts, such as the LED lights and wires.
5. Once cleaned, allow the mask to air-dry completely.
6. Store the mask in a clean, dry place to prevent damage or contamination
The Elite X600 LED Face Mask is an LED mask designed for the face and neck. Thanks to its 3D soft medical-grade silicone structure, it perfectly hugs the contours of the face and jawline.
Its 300 red LEDs, boasting a wavelength of 633 nanometres, can penetrate 8 to 10mm deep beneath the skin, stimulating collagen production and improving the skin’s elasticity, firmness, and texture. Thanks to their regenerating and soothing properties, the LEDs help reduce inflammation and redness, increase skin hydration, and minimise acne scars, dark spots, and skin imperfections.
The mask's 300 near-infrared LEDs, with a wavelength of 830 nanometres, penetrate even deeper into the skin to stimulate collagen and elastin production in a different way. They also help reduce skin inflammation, boost hydration, improve texture and radiance, and reduce signs of ageing.
The mask's exceptional irradiance of 50 mW/cm² (that corresponds to the amount of light from the LEDs that reaches the skin) enables effective cellular stimulation, without risk of the skin overheating. In addition, its 90° beam angle allows the light to be emitted perpendicularly to the skin, ensuring precise delivery for direct penetration into the epidermis without deviation, resulting in maximum energy absorption.
The result?
This LED mask – effective on the entire face and neck thanks to its 600 medical-grade LEDs – visibly improves skin quality: it enhances radiance, supports collagen, tones facial contours, refines pores, evens the complexion, and helps preserve youthful skin.
300 red LEDs (633 nanometres)
Stimulate collagen production, improve elasticity and firmness, reduce redness and the appearance of wrinkles and fine lines, increase hydration, and improve skin texture
300 near-infrared LEDs (830 nanometres)
Help reduce inflammation, increase hydration, and improve skin texture
Exceptional irradiance of 50 mW/cm²
Enables effective cellular stimulation
Our customer's reviews